Find a Slips and Falls Expert
Experts on accident reconstruction analysis including code violations, human error and personal injury due to slips and falls. Slips and Falls experts serve as expert witnesses and forensic consultants in Manitoba legal matters, and provide expert reports and testimony for judges, attorneys, lawyers, law firms, insurance companies and government agencies in Federal and state court trials and arbitrations in Manitoba.
The listings below are of Slips and Falls experts serving Manitoba.
Featured ListingsScientific Advisory Services, LTD
Dr. C.J. Abraham,PhD, JD, PE, DPE, CPC, FRSC, DEE, IH FTI, BCFE, DCEE, CChE, CChem
Great Neck, NY
Dr. Abraham is a licensed P.E. and a Senior Member and a Diplomat in The National Academy of Forensic Engineers. Over the last 45 years, Dr. Abraham has consulted on several thousand cases involving a variety of products and accidents in personal injury cases, construction cases, sports and recreation cases. He has consulted to major news channels, NHTSA, OSHA, NIOSH, State of California (CaI if Trans), Microsoft, New York Transit, Queensborough Bridge Authority, Department of Agriculture, the Federal Government, office of the United States Attorney, State Attorney General's Offices, and municipalities throughout the United States, Canada and Europe in a variety of technical areas.
Safety, Health, & Environmental Expert
Jon J. Pina, MS, CSP
Injuries, Fires, Spills, Wrongful Death,
Toxic Tort; Slip/Trip/Falls, Material
Handling, Forklifts, Defensive Driving, Off-
road Vehicles; Asbestos, Hazardous
Materials, Demolition, Construction;
Stream/Groundwater/Soil Contamination, PPE.
Expert ListingsGrayhawk Safety & Health Consulting Company
25 yrs. with OSHA Compliance conducting fatal & non-fatal accident investigations. I have comprehensive experience in the manufacturing and construction sectors conducting more than 1,000 onsite inspections / investigations. Retired from OSHA in 2008, and I began my private consulting firm specializing in working with attorneys as an expert wintess. Adjunct Instructor & President / CEO of Grayhawk Safety & Health Consulting Co.
Real-World Forensic Engineering, LLC
As the founding president of RWFE, Dr. Rasty is assisted by a staff of Masters and PhD-level Mechanical & Electrical Engineers. Dr. Rasty has 30+ years of experience in investigating over 750 accidents, and testifying as an expert witness in over 250 depositions and 12 court appearances on behalf of both Plaintiffs (60%) and Defendants (40%). As a full-time professor of mechanical engineering, as well as the director of the post-graduate forensic engineering program at Texas Tech University, Dr. Rasty has taught over 25 upper level and graduate courses in the areas of Failure Analysis, Metallurgy, Design, Safety Engineering, Materials Science, Dynamics of Motion, and Stress Analysis. Dr. Rasty's expertise areas have been effectively utilized in Products and Premises Liability cases involving design, manufacturing, or marketing defects. Dr. Rasty has successfully served as a technical expert in cases involving Fire & Explosion, Safety Engineering, Warning/Marketing Defects, Slip & Fall Incidents, Boilers and Pressure Vessels, Fasteners,Ladders, Tree Stands, Chairs, Medical Devices ..... and much more.
Hub Engineering PLLC
New York, NY
HUB Engineering provides Forensic Engineering and Expert Witness services to the legal insurance construction and public safety industries. The multi-disciplined experience of Himad Beg P.E. Principal and Founder of HUB Engineering provides our clients with exceptional Forensic Engineering and Expert Witness services. WWW.HUBENGINEERING.COM
Universal Safety Service LLC
Fort Pierce, FL
With over 22 years, of experience, Bobby has vast experience, knowledge, and the insight to think outside the box as well as prove his case when working as an Expert Witness for law firms. His clients have also reaped the rewards of his ability to have OSHA citations and fines revoked as well as settling for a reduced citation, categorization or fine. He's also proven himself, to stand firm, while working with local law enforcement, after his investigation, to change their findings and update initial reports to support facts and not beliefs. He's more than qualified to provide practical and technical safety expertise for litigated cases involving fatalities, large and small losses as he's worked for and represented fortune 500 companies and smaller entities within the following industries:
- Department of Transportation,
- Health (State of Florida),
- Hazardous Waste,
- Solid Waste; and
Ernest P. Chiodo, MD, JD, MPH, MS, MBA, CIH
Clinical and Forensic Medicine
MD & JD (Wayne State), MPH (Harvard), MS (Biomedical Engineering and Toxicology-WSU), MBA (University of Chicago), MS (University of Oxford), CIH. Physician, Attorney, Certified Industrial Hygienist, Toxicologist & Epidemiologist. Former Medical Director of the Detroit Health Department. Board certified in internal med, occupational & environ. med, & public health. Inducted into the Engineering Hall of Fame (Wayne State University).
James Rappoport, AIA - NCARB
Rappoport Daroff Design
Many recent legal cases in consultation with attorneys representing both Plaintiffs and Defendants have focused on premises liability, supported by on-site investigations, research and documentation, building code citations, ADA accessibility law citations and related local, state and Federal laws governing the built environment. Some of these premises liability legal cases have involved personal injury complaints, and some have involved wrongful death matters.
Atlas Safety & Security Design Inc.
Fort Lauderdale, FL
America's only architect and criminologist uniquely specializing in premises security negligence cases. Atlas is a registered architect and world recognized criminologist. Case experience in ADA accessibility cases, inmate violence and suicide cases, slips trips and falls, parking lot cases, apartment building cases, hotel cases and much more.
Habitat Engineering & Forensics, Inc.
Fari Barzegar, PhD, PE
Over 30 years of experience; Structural/Civil Engineering; Construction Defects/Accidents & Disputes; Buildings, Bridges, Silos, Public Works; Vibration, Explosion, Earthquake, Wind, Fire, Flood & Demolition-Related Damage; Failure Investigations/Analysis, Errors/Omissions, Code Compliance, Standard of Care; Slip, Trip & Fall Injuries; Inspection & Report; Expert Consultant/Witness in Over 60 Cases; Testimony & Trial Experience
Combs & Associates
Peter Combs, Architect
28 years as a trial experienced expert witness specializing in architecture, construction, ADA compliance, building codes, disabled access, contract disputes, water intrusion and forensic reconstruction of accident sites from photographs.
Jeremy Swenson, CSP
Snow Removal Expert Witness Services to legal professionals needing assistance with snow and ice removal slip and fall cases. He is a Snow Expert in black ice, sleet, freezing rain, and slick conditions. He is very familiar with the snow and ice removal industry standard operations and practices across the country, and will help determine how this relates to the snow removal agreement or operations in a slip and fall incident or snow related accident.
WEXCO International Corp.
Brad Avrit, PE
Marina Del Rey, CA
Experts in Building Codes, Safety Engineering, Safety Regulations, Pedestrian Locomotion, Coefficient of Friction Technology, Forensic Engineering to determine accident causation. WEXCO has investigated over 10,000 cases, delivered over 2,000 depositions & testified in over 600 trials.
J.M. Miller Engineering Inc.
Ann Arbor, MI
Dr. Miller is an Emeritus Engineering Professor at the University of Michigan and a registered mechanical professional engineer with over 30 years of experience. He has served as a consultant to industry and government and is highly qualified to give engineering testimony. He and his engineering
staff specialize in: designing warnings, instruction manuals, and labeling (including OSHA 2012 GHS requirements); auto and truck accident reconstruction; mechanical and electrical safety; fire, explosion, and chemical process accident analysis; slip and fall prevention; marine, swimming,
and recreational vehicle accidents (boats, ATVs, and personal watercraft); farm accidents; and compliance with governmental and consensual safety standards (OSHA, CPSC, ANSI, ASTM, UL, ASABE, etc).
Dr. Miller has recently authored a chapter titled “Hazard Communication Compliance” in the American Society of Safety Engineering Safety Engineering Handbook. He has also authored five books on the topic of Warnings and Safety Instructions and written numerous journal articles. He is currently a committee member of the ASTM Technical Committee F15 on Consumer Products.
Dr. Miller holds a B.S. in Mechanical Engineering and a Ph.D. in Industrial Engineering from Ohio State University, where he was one of the first U.S. Ph.D. graduates to specialize in transportation and consumer accident research. He became a professor at the University of Michigan’s Department
of Industrial and Operations Engineering (IOE), where he taught courses in human factors / ergonomics, safety engineering, methods engineering, and law for engineers (1970-1998). On leave from the University at the U.S. Department of Labor (1975-1977), he was appointed as Special Assistant for Safety to OSHA’s Assistant Secretary of Labor, where he had responsibility, among other things, of revising the OSHA General Industry (29 CFR 1910) and Construction (29 CFR 1926) Safety Standards. He also participated in the early formation of the OSHA HazCom standard (29 CFR 1200) and original MSDSs and chemical labels.
Traction Auditing, LLC
Brent Johnson is nationally recognized in the walkway traction testing industry and the author of many articles on the application of national standards for slip, and fall prevention. Mr. Johnson specializes in testing to national standards helping industries to prevent walkway injuries. He also assists by utilizing walkway test standards in slip and fall cases for both defense and plaintiff attorneys. As the first NFSI/ANSI Walkway Auditor Certificate Holder, he has helped pioneer the walkway auditing industry and is now an instructor for the National Floor Safety Institute. Mr. Johnson is an educator and consultant to the manufacturing, restaurant, retail, insurance, and safety industries to further their efforts in the prevention of slip and fall injuries.
Michael D. Leibowitz, M.D.,C.M.D.
Advanced Pain Medicine and Rehabilitation, P.C.
Roslyn Heights, NY
Experienced med expert, Board Certified-Physical Medicine & Rehab. Excellent credentials. Litigation support-plaintiff, defense & ins. co.;med malpractice, disability eval/mngmt., personal injury, peer review, utilization review, managed care, IME.
Ellis Fall Safety Solutions
Nigel Ellis, Ph.D., Principal, CSP, P.E., CPE
Ellis Litigation Support (ELS) is headed by Dr. J. Nigel Ellis a leading authority on fall protection. Dr. Ellis has more than 40 years of safety engineering experience. Based upon his unsurpassed experience and knowledge, Dr. Ellis has performed fall hazard assessments in hundreds of facilities and construction sites and has been retained as an expert witness in approximately 1000 fall-related cases nationwide. Dr. Ellis’ participation has led to multi-million dollar settlements/awards in a number of cases and exoneration of defendants in others.
Las Vegas, NV
With over 30 years of real world, hands on international experience, Rauch Safety provides consulting to insurance companies, municipalities, government agencies, and the legal profession. Rauch Safety offers consultation, expert testimony, litigation support, the rendering of independent expert opinions, strategic advice to attorneys and clients concerning technical issues safety violations, accidents, project and human factors and related negligence and incompetence. Main Areas of Specialization Include: Audits Accident Reconstruction Accident Investigation Construction Site Structural & Façade Maintenance Construction Safety Building Maintenance Units (BMU) Human Factors Engineering Ladders & Scaffolds OSHA Safety Safety Engineering Safety Equipment Walking & Working Surfaces
Rich Arlington & Associates
Richard Arlington, III, CSP, CLP
Lake City, PA
Trail and Deposition tested snow and ice expert, works for both defense and plaintiff. 30 + years in the snow and ice industry with an ongoing multi state snow operation still in existence. Has won the best of the best in safety awards for multiple years and teaches snow and ice standards and operational training to contractors, municipalities, and major facilities across the US.