Find a Slips and Falls Expert
Experts on accident reconstruction analysis including code violations, human error and personal injury due to slips and falls. Slips and Falls experts serve as expert witnesses and forensic consultants in British Columbia legal matters, and provide expert reports and testimony for judges, attorneys, lawyers, law firms, insurance companies and government agencies in Federal and state court trials and arbitrations in British Columbia.
The listings below are of Slips and Falls experts serving British Columbia.
Featured ListingsScientific Advisory Services, LTD
Dr. C.J. Abraham,PhD, JD, PE, DPE, CPC, FRSC, DEE, IH FTI, BCFE, DCEE, CChE, CChem
Great Neck, NY
Dr. Abraham is a licensed P.E. and a Senior Member and a Diplomat in The National Academy of Forensic Engineers. Over the last 45 years, Dr. Abraham has consulted on several thousand cases involving a variety of products and accidents in personal injury cases, construction cases, sports and recreation cases. He has consulted to major news channels, NHTSA, OSHA, NIOSH, State of California (CaI if Trans), Microsoft, New York Transit, Queensborough Bridge Authority, Department of Agriculture, the Federal Government, office of the United States Attorney, State Attorney General's Offices, and municipalities throughout the United States, Canada and Europe in a variety of technical areas.
Safety, Health, & Environmental Expert
Jon J. Pina, MS, CSP
Injuries, Fires, Spills, Wrongful Death, Toxic Tort; Slip/Trip/Falls, Material Handling, Forklifts, Defensive Driving, Off- road Vehicles; Asbestos, Hazardous Materials, Demolition, Construction; Stream/Groundwater/Soil Contamination.
Expert ListingsHub Engineering PLLC
New York, NY
HUB Engineering provides Forensic Engineering and Expert Witness services to the legal insurance construction and public safety industries. The multi-disciplined experience of Himad Beg P.E. Principal and Founder of HUB Engineering provides our clients with exceptional Forensic Engineering and Expert Witness services. WWW.HUBENGINEERING.COM
Habitat Engineering & Forensics, Inc.
Fari Barzegar, PhD, PE
Over 30 years of experience; Structural/Civil Engineering; Construction Defects/Accidents & Disputes; Buildings, Bridges, Silos, Public Works; Vibration, Explosion, Earthquake, Wind, Fire, Flood & Demolition-Related Damage; Failure Investigations/Analysis, Errors/Omissions, Code Compliance, Standard of Care; Slip, Trip & Fall Injuries; Inspection & Report; Expert Consultant/Witness in Over 60 Cases; Testimony & Trial Experience
Universal Safety Service LLC
Fort Pierce, FL
With over 22 years, of experience, Bobby has vast experience, knowledge, and the insight to think outside the box as well as prove his case when working as an Expert Witness for law firms. His clients have also reaped the rewards of his ability to have OSHA citations and fines revoked as well as settling for a reduced citation, categorization or fine. He has also proven himself, to stand firm, while working with local law enforcement, after his investigation, to change their findings and update initial reports to support facts and not beliefs.
Michael D. Leibowitz, M.D.,C.M.D.
Advanced Pain Medicine and Rehabilitation, P.C.
Roslyn Heights, NY
Experienced med expert, Board Certified-Physical Medicine & Rehab. Excellent credentials. Litigation support-plaintiff, defense & ins. co.;med malpractice, disability eval/mngmt., personal injury, peer review, utilization review, managed care, IME.
Atlas Safety & Security Design Inc.
Fort Lauderdale, FL
America's only architect and criminologist uniquely specializing in premises security negligence cases. Atlas is a registered architect and world recognized criminologist. Case experience in ADA accessibility cases, inmate violence and suicide cases, slips trips and falls, parking lot cases, apartment building cases, hotel cases and much more.
Traction Auditing, LLC
Brent Johnson is nationally recognized in the walkway traction testing industry and the author of many articles on the application of national standards for slip, and fall prevention. Mr. Johnson specializes in testing to national standards helping industries to prevent walkway injuries. He also assists by utilizing walkway test standards in slip and fall cases for both defense and plaintiff attorneys. As the first NFSI/ANSI Walkway Auditor Certificate Holder, he has helped pioneer the walkway auditing industry and is now an instructor for the National Floor Safety Institute. Mr. Johnson is an educator and consultant to the manufacturing, restaurant, retail, insurance, and safety industries to further their efforts in the prevention of slip and fall injuries.
Las Vegas, NV
With over 30 years of real world, hands on international experience, Rauch Safety provides consulting to insurance companies, municipalities, government agencies, and the legal profession. Rauch Safety offers consultation, expert testimony, litigation support, the rendering of independent expert opinions, strategic advice to attorneys and clients concerning technical issues safety violations, accidents, project and human factors and related negligence and incompetence. Main Areas of Specialization Include: Audits Accident Reconstruction Accident Investigation Construction Site Structural & Façade Maintenance Construction Safety Building Maintenance Units (BMU) Human Factors Engineering Ladders & Scaffolds OSHA Safety Safety Engineering Safety Equipment Walking & Working Surfaces
WEXCO International Corp.
Brad Avrit, PE
Marina Del Rey, CA
Experts in Building Codes, Safety Engineering, Safety Regulations, Pedestrian Locomotion, Coefficient of Friction Technology, Forensic Engineering to determine accident causation. WEXCO has investigated over 10,000 cases, delivered over 2,000 depositions & testified in over 600 trials.
J.M. Miller Engineering Inc.
Ann Arbor, MI
Dr. Miller is an Emeritus Professor at the University of Michigan College of Engineering and a registered professional engineer and consultant with over 30 years of experience as an engineering expert witness. He specializes in warnings, labeling and instruction manuals, consumer product design, machine guarding, process safety, fire science, vehicle visibility, tractor egress/ingress, pedestrian and worker slip and fall prevention, COF testing, recreational vehicle safety (boats, ATVs and personal watercraft), compliance with occupational safety and consumer safety standards (OSHA, MSDS, ANSI, ASTM, UL, CPSC). Dr. Miller has recently authored a chapter titled Hazard Communication Compliance in the Safety Engineering Handbook for ASSE. Dr. Miller has authored five books on the topic of Warnings and Safety Instructions and hundreds of journal articles. He is also currently a committee member of the ASTM Technical Committee F15 on Consumer Products. Dr. Millers experience includes the following: Bachelor of Mechanical Engineering (1963), M.B.A. (1965), and Ph.D. in Industrial Engineering (1971), Ohio State University. Owens-Corning Fiberglass (1964-1967): Corporate Methods Engineer. The University of Michigan (1970-present): Industrial and Operations Engineering (IOE) Professor, teaching courses in human factors/ergonomics, safety, engineering law, and labor relations. U.S. Department of Labor (1975-1977): Special Assistant for Safety, Assistant Secretary of Labor.
Combs & Associates
Peter Combs, Architect
28 years as a trial experienced expert witness specializing in architecture, construction, ADA compliance, building codes, disabled access, contract disputes, water intrusion and forensic reconstruction of accident sites from photographs.
Jeremy Swenson, CSP
Snow Removal Expert Witness Services to legal professionals needing assistance with snow and ice removal slip and fall cases. He is a Snow Expert in black ice, sleet, freezing rain, and slick conditions. He is very familiar with the snow and ice removal industry standard operations and practices across the country, and will help determine how this relates to the snow removal agreement or operations in a slip and fall incident or snow related accident.
Ernest P. Chiodo, MD, JD, MPH, MS, MBA, CIH
Clinical and Forensic Medicine
MD & JD (Wayne State), MPH (Harvard), MS (Biomedical Engineering and Toxicology-WSU), MBA (University of Chicago), MS (University of Oxford), CIH. Physician, Attorney, Certified Industrial Hygienist, Toxicologist & Epidemiologist. Former Medical Director of the Detroit Health Department. Board certified in internal med, occupational & environ. med, & public health. Inducted into the Engineering Hall of Fame (Wayne State University).
Rich Arlington & Associates
Richard Arlington, III, CSP, CLP
Lake City, PA
Trail and Deposition tested snow and ice expert, works for both defense and plaintiff. 30 + years in the snow and ice industry with an ongoing multi state snow operation still in existence. Has won the best of the best in safety awards for multiple years and teaches snow and ice standards and operational training to contractors, municipalities, and major facilities across the US.
James Rappoport, AIA - NCARB
Rappoport Daroff Design
Many recent legal cases in consultation with attorneys representing both Plaintiffs and Defendants have focused on premises liability, supported by on-site investigations, research and documentation, building code citations, ADA accessibility law citations and related local, state and Federal laws governing the built environment. Some of these premises liability legal cases have involved personal injury complaints, and some have involved wrongful death matters.
Restaurant Expert Witness
NATIONWIDE Services---we DO NOT charge for domestic travel!! Howard Cannon is one of the most highly visible American Restaurant, Bar and Hospitality Industry Expert Witnesses. He is experienced with State & Federal cases, and with Plaintiffs & Defendants. With 230+ Litigation and 300+ Pre-Litigation projects to his credit, Howard's firm provides expert witness services & litigation support (expert witness testimony, expert opinions, and reports) for restaurant and bar-related cases.
Real-World Forensic Engineering, LLC
As the founding president of RWFE, Dr. Rasty is assisted by a staff of Masters and PhD-level Mechanical & Electrical Engineers. Dr. Rasty has 30+ years of experience in investigating over 750 accidents, and testifying as an expert witness in over 250 depositions and 12 court appearances on behalf of both Plaintiffs (60%) and Defendants (40%). As a full-time professor of mechanical engineering, as well as the director of the post-graduate forensic engineering program at Texas Tech University, Dr. Rasty has taught over 25 upper level and graduate courses in the areas of Failure Analysis, Metallurgy, Design, Safety Engineering, Materials Science, Dynamics of Motion, and Stress Analysis. Dr. Rasty's expertise areas have been effectively utilized in Products and Premises Liability cases involving design, manufacturing, or marketing defects. Dr. Rasty has successfully served as a technical expert in cases involving Fire & Explosion, Safety Engineering, Warning/Marketing Defects, Slip & Fall Incidents, Boilers and Pressure Vessels, Fasteners,Ladders, Tree Stands, Chairs, Medical Devices ..... and much more.