Safety OSHA Experts Serving Idaho
Change State | Show all Idaho experts

Find a Safety OSHA Expert

Experts in the Occupation Safety and Health Act (OSHA), including failure analysis of mechanical systems, including accident investigation and reconstruction, warnings and safety information analysis and development, safety design. Safety OSHA experts serve as expert witnesses and forensic consultants in Idaho legal matters, and provide expert reports and testimony for judges, attorneys, lawyers, law firms, insurance companies and government agencies in Federal and state court trials and arbitrations in Idaho.
The listings below are of Safety OSHA experts serving Idaho.

Featured Listings

Jon J. Pina, MS, CSPSafety, Health, & Environmental Expert
Jon J. Pina, MS, CSP
Indiana, PA
Expertpages Verified

Injuries, Fires, Spills, Wrongful Death, Toxic Tort; Slip/Trip/Falls, Material Handling, Forklifts, Defensive Driving, Off- road Vehicles; Asbestos, Hazardous Materials, Demolition, Construction; Stream/Groundwater/Soil Contamination.

Featured Listings

Expert Listings

Bruce Miller, MS, CIHHealth Safety Services, LLC
Bruce Miller, MS, CIH
Idaho Falls, ID
Expertise in OSHA, Occupational Safety & Health Administration regulations compliance, accident investigation, Indoor Air Quality, water damage, microbial/mold, exposure assessment, Personal Protective Equipment, construction, environmental, lead, asbestos, fall protection.

James M Miller, PE, PhDJ.M. Miller Engineering Inc.
James M Miller, PE, PhD
Ann Arbor, MI
Dr. Miller is an Emeritus Professor at the University of Michigan College of Engineering and a registered professional engineer and consultant with over 30 years of experience as an engineering expert witness. He specializes in warnings, labeling and instruction manuals, consumer product design, machine guarding, process safety, fire science, vehicle visibility, tractor egress/ingress, pedestrian and worker slip and fall prevention, COF testing, recreational vehicle safety (boats, ATVs and personal watercraft), compliance with occupational safety and consumer safety standards (OSHA, MSDS, ANSI, ASTM, UL, CPSC). Dr. Miller has recently authored a chapter titled Hazard Communication Compliance in the Safety Engineering Handbook for ASSE. Dr. Miller has authored five books on the topic of Warnings and Safety Instructions and hundreds of journal articles. He is also currently a committee member of the ASTM Technical Committee F15 on Consumer Products. Dr. Miller’s experience includes the following: Bachelor of Mechanical Engineering (1963), M.B.A. (1965), and Ph.D. in Industrial Engineering (1971), Ohio State University. Owens-Corning Fiberglass (1964-1967): Corporate Methods Engineer. The University of Michigan (1970-present): Industrial and Operations Engineering (IOE) Professor, teaching courses in human factors/ergonomics, safety, engineering law, and labor relations. U.S. Department of Labor (1975-1977): Special Assistant for Safety, Assistant Secretary of Labor.

Gary L. Buffington, CSP, CRSP, CSHM, PIAmerican Safety Consulting
Gary L. Buffington, CSP, CRSP, CSHM, PI
Santa Clarita, CA
30 Years Experience. Certified Safety Professional. OSHA, CAL/OSHA, OR/OSHA, TX/OSHA, MSHA compliance expert; Certified OSHA/MSHA Instructor; Construction, General Industry, & Mining Safety/Health standards of care; ANSI; Personal Injury; Investigations; Audits/Inspections; Offices in Florida & Kansas.

Bransford PickettSystems Engineering and Forensic Services
Bransford Pickett
Chula Vista, CA
Cranes, rigging, forklifts, aerial devices, conveyors, mechanical and reliability engineering, failure and simulation analyses, ANSI, OSHA. Floating dry docks, barges, stability, multicrane lift planning, compliance.

The Expert of ExpertsForensisGroup, Inc.
The Expert of Experts
Pasadena, CA
Over 10,000 CLIENTS HAVE RETAINED OUR EXPERTS NATIONWIDE! Cross examine thousands of experts with one phone call. We are your Expert Witness Services firm since 1991! We make it easy & provide you with the RIGHT EXPERT promptly. Searches,referrals & initial discussions are at NO COST to you. Our TECHNICAL ADVANTAGE gives you COMPETITIVE EDGE.

Brad Avrit, PEWEXCO International Corp.
Brad Avrit, PE
Marina Del Rey, CA
40+ years as an industry leader in construction management, claims & claims prevention, safety programs & forensic analysis. Licensed Safety Engineers & Certified Safety Professionals. WEXCO has investigated over 10,000 cases, delivered over 2,000 depositions & testified in over 600 trials.

Leslie Hutchinson, MDHLM Medical Consultants
Leslie Hutchinson, MD
Auburn, GA


Timothy KobernatOSHAware, LLC
Timothy Kobernat
Eau Claire, WI
A former OSHA area director and District Supervisor, I am now working as a consultant with OSHAware, LLC. OSHAware is a consulting firm providing worksite safety/hazard analysis, accident investigation, cause determination and expert witness services for plaintiff & defense attorneys.

Georgia PerskyGeorgia Persky Consulting LLC
Georgia Persky
Harrison, NY
Expertpages Verified

Georgia J. Persky RN, MBA, PhD, CLNC, is a seasoned nurse with over 40 years of broad Clinical Nursing experience (inpatient and surgical) and 25 years of Senior Leadership in Healthcare Organizations. Expertise include Nursing, Hospital, Nursing Home and Home Health Agency, Fall Protection, Pressure Ulcer Prevention, Wrongful Death, Healthcare Practices and Records, Legal Nurse Consultants / LNC

James StanleyFDRsafety
James Stanley
Franklin, TN
Jim Stanley President of FDRsafety is a nationally recognized expert in occupational safety, having served as Deputy Assistant Secretary of Labor for OSHA, and is a highly experienced expert witness. Jim leads a team of experts with top-level credentials in safety who can address a wide variety of issues in the field.

Dr. C.J. Abraham, Dir., P.E., FRSC, FTI, DEEScientific Advisory Services, LTD
Dr. C.J. Abraham, Dir., P.E., FRSC, FTI, DEE
Great Neck, NY
International experience in Warnings & Instructions, OSHA, ADA, Labor Law, Human Factors, Household/Industrial Products, Safety Engineering, Manufacturing, Industrial Hygiene, Textiles, Fires/Explosions, Slips/Falls, Recreational/Sports Accidents, & Trial Consultant.

Rauch Safety

Las Vegas, NV
With over 30 years of real world, hands on international experience, Rauch Safety provides consulting to insurance companies, municipalities, government agencies, and the legal profession. Rauch Safety offers consultation, expert testimony, litigation support, the rendering of independent expert opinions, strategic advice to attorneys and clients concerning technical issues safety violations, accidents, project and human factors and related negligence and incompetence. Main Areas of Specialization Include: • Audits • Accident Reconstruction • Accident Investigation • Construction Site • Structural & Façade Maintenance • Construction Safety • Building Maintenance Units (BMU) • Human Factors Engineering • Ladders & Scaffolds • OSHA • Safety • Safety Engineering • Safety Equipment • Walking & Working Surfaces

Dennis EckstineEckstine & Associates, Inc.
Dennis Eckstine
Waynesboro, PA
Eckstine & Associates, Inc. (E & A) provides experts, safety consulting, safety training, and engineering consulting services relating to construction, industrial, and agricultural equipment including cranes, aerial lifts, fork lifts, trucks, ladders.

Ralph CollipiOracle Safety Consulting LLC
Ralph Collipi
Londonderry, NH
Expertpages Verified

Ralph V Collipi Jr CIH CHMM CPEA has more than 35 years of expertise in industrial hygiene, occupational safety, emergency preparedness and response and regulated waste management. He has knowledge on a wide variety of environmental and safety compliance topics and has been doing witness work since 2009.

Michael J. Fagel, PhDAurora Safety
Michael J. Fagel, PhD
Sugar Grove, IL
Aurora Safety specializes in safety-related case consultation and support. We represent businesses of all types and sizes, including smaller companies that have been cited by OSHA or are struggling with complex OSHA regulations.

Clinical and Forensic MedicineErnest P. Chiodo, MD, JD, MPH, MS, MBA, CIH
Clinical and Forensic Medicine
Chicago, IL
Expertpages Verified

MD & JD (Wayne State), MPH (Harvard), MS (Biomedical Engineering and Toxicology-WSU), MBA (University of Chicago), CIH. Physician, Attorney, Certified Industrial Hygienist, Toxicologist & Epidemiologist. Former Medical Director of the Detroit Health Department. Board certified in internal med, occupational & environ. med, & public health.

Bill Nolte, C.S.H.O.Electrical Technical & Safety Services
Bill Nolte, C.S.H.O.
Fort Worth, TX
Licensed Master Electrician with 45+ years of experience, IBEW Journeyman Inside Wireman 39+ years (in Good Standing), Certified Safety and Health Official 2005 present (OSHA Region VI Southwest Training Center - Texas A&M Engineering Extension Service. Authorized OSHA Instructor, Electrical Safety and Technical Trainer 2011 present. Converting the technical into lay terms or translating the electrical installation into appropriate Code and or Standard references. Forensic Electrical Accident/Incident investigations.

Chip Darius, OHST, CET, CSHO, CUSPSafety Priority
Chip Darius, OHST, CET, CSHO, CUSP
Cromwell, CT
27 years experience in safety and OSHA compliance consulting & training. 16 years as instructor for OSHA Training Institute Education Center. Over 750 safety clients in more than 30 states and internationally since 2000. Expertise in falls, scaffolds, ladders, aerial lifts, forklifts, slips, machine guarding, heavy equipment, work zones.

Maritime Consultant & ExpertDavid E. Cole
Maritime Consultant & Expert
Bedford, TX
***B.S., J.D.*** 20 Years USCG Commander, Ret. Maritime consultant-expert since 1989. All types of vessels – case analysis, reports, inspections, depositions, trials – both plaintiff and defense. Work done nationally- References and rates upon request.

Nicholas CheremisinoffNo Pollution Enterprises
Nicholas Cheremisinoff
Charles Town, WV
Expertpages Verified

Dr. Nicholas P. Cheremisinoff is a chemical engineer with more than 35 years of industry applied research and international consulting experiences. He renders opinions based on a careful reconstruction of facility practices. He and his staff develop the source terms needed to quantify exposures and doses.

Gerald Hietpas, PECausey Engineering LLC
Gerald Hietpas, PE
Austin, TX
Our Experts are professionals with hands-on Industrial and Construction, office and field experience. They are trained in Forensic Engineering, have a broad scope of knowledge in OSHA as well as other industry regulations, and apply their knowledge to assist the Trier of Fact.

David Stauffer, CSP,ARMSafety Compliance Solutions, LLC
David Stauffer, CSP,ARM
Carmel, IN
Expertpages Verified

David has an unparalleled insight to his role as a consultant & expert witness for law firms. He is objectively qualified to provide technical and practical safety expertise for litigations involving injuries, large losses, and fatalities. David specializes with litigation in the waste industry with over 15 years of experience in the business.

Terry Morgan, DLP & CTL-AST & L & Surface Transportation Board PractitionerTerry Morgan Inc.
Terry Morgan, DLP & CTL-AST & L & Surface Transportation Board Practitioner
Sayre, PA
Terry Morgan, Inc. has over 50 years of experience in the operations, management, economics and regulation of trucking and distribution services. Our clients include law firms, insurance companies, state and federal agencies, financial institutions, transportation businesses, warehousing, manufacturing firms, and freight brokers.

Homer R. Peterson II, P.E., CSPPeterson Construction Consulting, Inc.
Homer R. Peterson II, P.E., CSP
Houston, TX
Expertpages Verified

Mr. Peterson specializes in occupational health and safety management systems, standards of care, wrongful death, personal injury, negligence, construction, safety, falls, fall protection, OSHA matters, and steel erection. Experience includes over 350 projects in 21 states and territories of the United States..

Ken Shorter, MS, CSP, ARM, TCDSAccident Prevention & Investigation, Inc.
Ken Shorter, MS, CSP, ARM, TCDS
Baltimore, MD
Focused on construction, demolition, traffic control, public injury & industrial accidents. Master’s Degree in Safety. Certified Safety Professional. Certified traffic control designer. ANSI A10 Committee member. Crane, forklift, trench, underground utilities, heavy equipment, falls, confined spaces, & other high-risk operations are my specialty.

Rick J Gleason, CIH, CSPGleason Safety
Rick J Gleason, CIH, CSP
Seattle, WA
Mr. Gleason is a Certified Safety Professional and Certified Industrial Hygenist with 36 years of experience. He worked for OSHA and State OSHA for 13 years. He teaches at the University of Wash. in their graduate program in Occupational Health and Safety.

Sitework Expert Consulting, Inc.William Gulya, Jr.
Sitework Expert Consulting, Inc.
Raritan, NJ
35 Years of Experience- Areas of Expertise- Excavation & Construction-Site Preparation-Differing site conditions-Scheduling- Delays-Earthwork and Grading-Trenching- OSHA Safety,-Heavy Equipment rentals-Underground Utilities - Storm Sewer, Sanitary Sewer, Water Mains-Paving,-Concrete Curbs-Sidewalks-Parking Lots- Heavy Equipment Safety