Find a Products Liability Expert
Experts in product hazards, recalls, consumer complaints, product testing, service bulletins, warnings and product labeling, defect and failure investigations and accident reconstruction. Products Liability experts serve as expert witnesses and forensic consultants in Utah legal matters, and provide expert reports and testimony for judges, attorneys, lawyers, law firms, insurance companies and government agencies in Federal and state court trials and arbitrations in Utah.
The listings below are of Products Liability experts serving Utah.
Featured ListingsCausey Engineering LLC
Gerald Hietpas, PE
Our Experts are professionals with hands-on Industrial and Construction, office and field experience. They are trained in Forensic Engineering,have a broad scope of knowledge in Product Design, Function, and Reliability - and apply their knowledge to assist the Trier of Fact.
Core Devices Inc.
Saint Louis, MO
Dr. Izuchukwu is an expert in product liability and patent infringement cases. His areas of expertise include endoscopic surgical staplers, skin staplers, ligation devices, clip appliers, linear and circular cutters, graspers, suturing devices, respiratory devices, anesthesia machines, drug delivery devices, compressed gas containers, pressure regulators, oxygen conservers, oxygen concentrators, cryogenic oxygen devices, breathing circuits, sleep diagnosis and monitoring devices, sleep apnea products, sleep masks and sleep therapy devices, such as CPAP machines, BPAP machines, and portable ventilators. During his industry career, he designed more than two dozen commercially successful medical devices, manufacturing process and quality control procedures, in compliance with FDA and CE Quality Systems Regulations. With 19 utility patents issued to him, Dr. Izuchukwu has successfully testified as an expert witness on product liability prosecution and defense cases, and has served as a consultant as well as expert on patent litigation cases. His forensic skills includes ability to pin-point causes of device and equipment failures, whether attributable to design or manufacturing defects, operator misuse or error. Attorneys have found Dr. Izuchukwus unique educational, professional and life experience to be useful, when arguing their cases. In fact his expert testimony has led to several uncontested positive conclusions.
Alpine Engineering & Design, Inc.
Fred P. Smith, David G. Smith, Nathan H. Morrill, Cameron C. Orr
Mechanical engineer, electrical engineer, failure analysis, machinery and industrial equipment, electronic engineering, engineering forensic disciplines, product liability, forklifts, safety, safety engineering, waste management, power tools, accidents and injuries, machinery equipment, power tools, finite element analysis, patent
Expert ListingsAdvantagement, LLC
Palm Beach, FL
I am an accomplished versatilist who has been involved in bringing beneficial technology solutions and options to business and industry for my entire 35+ year career.
Richard Collins, Ph.D., M.Sc., B.Sc.
Cranberry Township, PA
Accurate research & scientific analysis in mechanical and biomedical engineering & regulatory assessments. Litigation support in: Accident reconstruction, Injury biomechanics and Medical device product liability. Consultation in Biomedical & Human Factors Engineering; Former Professor of Medicine; Professor of Mechanical/Aerospace Engineering.
James G. Rice, PhD
Mechanical Engineering, IP/Patent Litigation
Experienced expert witness working with top law firms on patent litigation in the area of mechanical engineering. Over 40 years experience in industry and academia. Has provided litigation support in over 75 patent cases over the last 18 years.Dr. Rice has been deposed more than 40 times and has testified at trial 9 times.
Expert In Intellectual Property And Product Liability
South Lyon, MI
Michael Nranian has over 30 years of experience focusing in Product Development, Intellectual Property, Patent Litigation, Legal and Technical Compliance, & Product Liability Litigation. He is a Professional Engineer, & Certified Project Management Professional. He has an in-depth background and education in Law, Intellectual Property, Electrical, Chemical, & Computer Engineering, Product Liability, & Business.
Webster Engineering LLC
Registered Professional Mechanical Engineer in Wisconsin, Board Certified Forensic Engineer, 30 years of experience in custom industrial machine design, conveyors, material handling equipment, material lifts and elevators, shopping cart conveyors, Computer aided analysis, FEA, dynamic analysis and simulation. Member, ASME Board on Safety Codes and Standards.
A.D. Taveira LLC
Professor Alvaro D. Taveira, PhD, CSP, CPE
UW Professor & Dept. Chair, PhD, Certified Safety Professional, Certified Professional Ergonomist, safety and human factors/ergonomics, occupational safety, premises safety, product safety, warnings and instructions, musculoskeletal disorders, OSHA, job/workstation analysis/design, slip trip & fall, machinery & equipment safety.
J.M. Miller Engineering Inc.
James M Miller, PE, PhD
Ann Arbor, MI
Dr. Miller is an Emeritus Professor at the University of Michigan College of Engineering and a registered professional engineer and consultant with over 30 years of experience as an engineering expert witness. He specializes in warnings, labeling and instruction manuals, consumer product design, machine guarding, process safety, fire science, vehicle visibility, tractor egress/ingress, pedestrian and worker slip and fall prevention, COF testing, recreational vehicle safety (boats, ATVs and personal watercraft), compliance with occupational safety and consumer safety standards (OSHA, MSDS, ANSI, ASTM, UL, CPSC). Dr. Miller has recently authored a chapter titled Hazard Communication Compliance in the Safety Engineering Handbook for ASSE. Dr. Miller has authored five books on the topic of Warnings and Safety Instructions and hundreds of journal articles. He is also currently a committee member of the ASTM Technical Committee F15 on Consumer Products. Dr. Millers experience includes the following: Bachelor of Mechanical Engineering (1963), M.B.A. (1965), and Ph.D. in Industrial Engineering (1971), Ohio State University. Owens-Corning Fiberglass (1964-1967): Corporate Methods Engineer. The University of Michigan (1970-present): Industrial and Operations Engineering (IOE) Professor, teaching courses in human factors/ergonomics, safety, engineering law, and labor relations. U.S. Department of Labor (1975-1977): Special Assistant for Safety, Assistant Secretary of Labor.
Moseley Vocational Consulting, LLC
Trey Moseley, MA, CRC
Trey Moseley, MA is a Certified Rehabilitation Counselor (CRC) with extensive experience providing forensic vocational consulting, vocational assessments, loss of earning capacity calculations, transferable skills analysis, labort market surveys, individual job analysis, psychometric testing, and litigation support in Personal Injury, Workers Compensation, Long Term Disability, Product Liability, Medical Malpractice, Discrimination, and Marital Dissolution cases
Gregory T. Whitman, M.D.
Board certified neurologist, author and speaker. Instructor at Harvard Medical School.
American Motorcycle Forensics
A certified expert in all aspects of motorcycle operation including Chassis Service, Electrical Diagnostics, Fuel Injection, Powertrain, Motorcycle Operation and Function. Pre-impact and Post-impact Velocities Vehicle Trajectory Cause Analysis Lamp Analysis Human Factors Motorcycle Inspection Component Failure Determination Motorcycle Handleability Testing and Analysis Motorcycle Safety Motorcycle Tire Defect Litigation Repair Fraud O.E.M vs. Aftermarket Parts Training.
Real-World Forensic Engineering, LLC
As the founding president of RWFE, Dr. Rasty is assisted by a staff of Masters and PhD-level Mechanical & Electrical Engineers. Dr. Rasty has 30+ years of experience in investigating over 750 accidents, and testifying as an expert witness in over 250 depositions and 12 court appearances on behalf of both Plaintiffs (60%) and Defendants (40%). As a full-time professor of mechanical engineering, as well as the director of the post-graduate forensic engineering program at Texas Tech University, Dr. Rasty has taught over 25 upper level and graduate courses in the areas of Failure Analysis, Metallurgy, Design, Safety Engineering, Materials Science, Dynamics of Motion, and Stress Analysis. Dr. Rasty's expertise areas have been effectively utilized in Products and Premises Liability cases involving design, manufacturing, or marketing defects. Dr. Rasty has successfully served as a technical expert in cases involving Fire & Explosion, Safety Engineering, Warning/Marketing Defects, Slip & Fall Incidents, Boilers and Pressure Vessels, Fasteners,Ladders, Tree Stands, Chairs, Medical Devices ..... and much more.
Dr. I. U. Ojalvo & Kristopher Seluga M.S., P.E.
Our staff of PhDs and Licensed Professional Engineers has provided expert services to attorneys and claims representatives in thousands of cases over the past thirty years. We have engineering experts who can handle a wide range of Mechanical, Civil and Electrical cases. Extensive experience in motor vehicle, biomechanics, product liability and safety cases, preparation of forensic animations, as well as numerous other capabilities. Locations in CT and NY.
Rimkus Consulting Group, Inc.
Curtis R. Brown, President and CEO
A world-class Consulting and Engineering firm with 39 offices and over 300 professionals experienced in all phases of forensic engineering and consulting, including Construction Problems & Disputes, Fires & Explosions, Industrial Problems, Vehicle Accidents, Financial Forensic issues, and Environmental damages.
Moore Consulting, LLC - A Legal Nurse Consulting Firm
Tamara Moore, RN, CLNC
La Salle, MI
Tamara Moore is an experienced legal nurse consultant - working with plaintiff and defense attorneys. Medical record review record organization location of experts literature research and the creation of timelines/chronologies are but a few of the many services offered. Your time is important - rush cases accepted at no additional charge.
Product Forensics Incorporated
Robert Miller, BSME, CFEI
In addition to his twenty-five years of experience in appliance design and manufacturing, Mr. Miller has more than twenty-five years of experience as an expert, consultant and forensic investigator in hundreds of product liability claims involving electric appliances, fulfilling a wide range of responsibilities: scene and laboratory inspections, failure analyses, accident reconstructions, as well as providing reports, and deposition and trial testimony.
Burl Daniel, CPCU, CIC, CRM
Fort Worth, TX
Insurance Expert Witness, Products Liability expertise includes: Contractors Completed Operations, Pharmaceuticals, Plastics, Automotive, Aviation, Steel Fabricators, Oil & Gas, Retail, Wholesale, Import/Export, Occurrence vs. Claims Made policy forms
Blue Silk Consulting
Rosemary Coates, MBA
Los Gatos, CA
Rosemary Coates is a Global Supply Chain Expert focusing on Chinese sourcing and manufacturing, Import/Export and logistics with 30 years of experience in industry and consulting. She is the author of five business books including amazon.com Best Seller,"42 Rules for Sourcing and Manufacturing in China", and "42 Rules for Superior Field Service" and "Negotiation Blueprinting for Buyers" and "Reshoring Guidebook" and "Legal Blacksmith- How To Avoid and Defend Supply Chain Disputes."
Thomas Shellenbarger, PE, MBA
NY & PA PE License, Mechanical Engineer, Failure Analysis, Product Liability, Safety Signs & Labels, Design, Valves, Pressure vessels, Piping, Pipe Couplings, Tanks, High Pressure, Elastomers, Composites, Rubber to Metal Bonding, Equipment & Machinery, Fluid Leaks, Design & Manufacturing Defects, Slips and Falls, Structural Defects, Corrosion defects
Michael Motley, Ph.D.
Santa Rosa, CA
Michael Motley, Professor Emeritus, University of California at Davis, provides expert opinion on the most likely or most reasonable interpretations to expect for a particular communication message (or set of messages). The message in question might be a warning label, a set of instructions, an advertisement, a contract, or any of several other possibilities.
Providing expert technical testimony for attorneys in product liability litigation and textile arbitration. Extensive knowledge of flammability characteristics of textiles, government regulations (Fiber I.D. Act; Care Labeling Act) and industry standards, both domestic and international.
Engineering Associate Services
Michael Plunkett Offices: NC and RI
South Kingston, RI
Thirty five years experience in the design analysis, inspection and auditing of piping, pipe supports structural and other mechanical components. Extensive experience performing design reviews, safety and hazards & engineering risk analyses. Office: Homosassa, Florida Office: Wakefield, Rhode Island