Machinery & Industrial Equipment Experts Serving New Brunswick
Change State | Show all New Brunswick experts

Find a Machinery & Industrial Equipment Expert

Experts in Machinery including, Circular and Press Saws, Construction Equipment, Drill Presses, Gas Appliances, Lawn Mowers, Microwave, Packaging Machines, Press Brakes, Pressure Valves, Punch Presses, Stump Grinders, etc. Machinery & Industrial Equipment experts serve as expert witnesses and forensic consultants in New Brunswick legal matters, and provide expert reports and testimony for judges, attorneys, lawyers, law firms, insurance companies and government agencies in Federal and state court trials and arbitrations in New Brunswick.
The listings below are of Machinery & Industrial Equipment experts serving New Brunswick.

Featured Listings

Mark R Webster, PE, MSME, DFE, MBAWebster Engineering LLC
Mark R Webster, PE, MSME, DFE, MBA
Hubertus, WI
Expertpages Verified
This expert is Attorney Endorsed

Registered Professional Mechanical Engineer in Wisconsin 30 years of experience in machine design including conveyors and material handling equipment lifts and elevators shopping cart conveyors and custom engineered machinery, automated control systems. Vice Chair of ASME B20.1 Safety Standard for Conveyors, Chair of the ASME Board on Safety Codes and Standards.

Featured Listings

Expert Listings

Rob Medlock - Former OSHA Area DirectorSafety Controls Technology, Inc. (SCT)
Rob Medlock - Former OSHA Area Director
Middlesburg Heights, OH
Video Available

Before joining Safety Controls Technology in February of 2011, Mr. Medlock served over 33 years in the forefront of occupational safety & health working for the Occupational Safety & Health Administration (OSHA). During his tenure he served in OSHA's Area, Regional, National and State Plan offices completing many assignments critical to the Agency and becoming well respected in the labor and business communities. He is a skilled team builder who believes in the value of providing a safe workplace.

John KalisJ.W. Kalis Engineering, LLC
John Kalis
Medford, NJ
Mr. Kalis, a Forensic Engineer, has served Legal for more than 20 years as an Expert Witness or Consultant. He has testified Nationally, in Quebec and France, and assisted Legal Firms in Hawaii and Austrilia. References are available. He was employed by a Major Chemical Company for more than 29 years as a Consultant Engineer, requiring world travel to facilities resolving issues with fires, system, equipment, material failures, poor workmanship and unsafe practices (injuries). In addition, Mr. Kalis has been an active member in the ASTM by developing material safety standards. He has been a speaker at numerous national and regional contracting and engineering association symposiums. Mr. Kalis served in the United States Army in a construction / engineering battalion designing hospitals and school facilities in Europe.

Dennis EckstineEckstine & Associates, Inc.
Dennis Eckstine
Waynesboro, PA
Eckstine & Associates, Inc. (E & A) provides experts, safety consulting, safety training, and engineering consulting services relating to construction, industrial, and agricultural equipment including cranes, aerial lifts, fork lifts, trucks, ladders.

Gary E. Kilpatrick, PE, DFEThe Kilpatrick Group, PA
Gary E. Kilpatrick, PE, DFE
Jamestown, NC
Expertpages Verified

Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a service provider of accident reconstruction to our legal and insurance clients. Gary is a board certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensic Engineer (DFE). He has extensive engineering education, training, experience and OSHA certifications in OSHA Safety and has designed industrial process equipment that incorporated machine guarding for moving parts. Gary has also been an industrial safety auditor and has been retained many industrial machinery accidents and product defect and failure analyses. Gary has a forensic engineering practice in cranes and forklift accidents and products defects and failure analyse including load charts, rigging and crane data recorders; Amusement Park Ride Accidents and products defects and failure analyse; General Industrial Accidents including OSHA Regulations. Gary is a certified Industrial OSHA Safety expert in General Industry and Construction Equipment. Gary travels throughout the United States to investigate motor vehicle crashes, product defect and failure claims resulting in personal injury or wrongful death.

Alpine Engineering & Design, Inc.

Alpine, UT
Expertpages Verified
Video Available

If you have ever worked with or near machines, you know that there are a number of things that can go wrong causing injury. These injuries range from minor injuries like pinched fingers to much larger injuries, and sometimes even death. Our experts have advanced degrees and certifications, but we understand that this is only one factor. Our experts have all been involved heavily in equipment design. While these two things are important, we know that being able to clearly communicate information is vital in any case. When you speak to one of our experts, you will find that they have an amazing balance of all three aspects that make an exceptional expert witness. Request one of our experts https://alpineeng.com/our-experts/ or call 801-763-8484

William F. Acton, PEBay Area Innovations, Inc.
William F. Acton, PE
San Jose, CA
Engineering expert for cases involving industrial equipment, machinery, power tools, and hand tools with over 25 years of engineering experience. Career focused on tool, equipment and machine design, including fabrication and installation. Expert qualified to provide engineering opinion on industry codes and standards (ANSI, ASTM, ASME, OSHA, etc.). Knowledge of product specifications and building code compliance. I excel at communicating complex technical topics to lay audiences.

James G. Robertson MSc, P.E.Robertson Consulting
James G. Robertson MSc, P.E.
Silver Spring, MD
Mr. Robertson wrote the firmware and software for two medical ultrasound instruments, for brake presses and for a fuel rod profilometer on GE nuclear power plants. Earlier in his career he programmed the inertial navigation equipment for submarines and for a star tracking system.