Find an Engineering Forensic Disciplines Expert
Investigation and litigation involving areas of engineering, may include aeronautical, civil, electrical, geological, marine, mechanical, nuclear, stress, seismic. Involves also FMEA and fault tree analysis, fatigue, corrosion, reverse engineering, quality control, safety and compliance issues. Forensic Engineering is the investigation of materials, products, structures or components that fail or do not operate/function as intended, and so cause personal injury for example. The consequences of failure are dealt by the law of product liability. Engineering Forensic Disciplines experts serve as expert witnesses and forensic consultants in Colorado legal matters, and provide expert reports and testimony for judges, attorneys, lawyers, law firms, insurance companies and government agencies in Federal and state court trials and arbitrations in Colorado.
The listings below are of Engineering Forensic Disciplines experts serving Colorado.
Featured ListingsRNA Consulting, Inc.
Robert N. Anderson, PhD, PE, PI
Los Altos Hills, CA
Robert N. Anderson, PhD, PE, PI, is an expert witness in Engineering Forensic Disciplines, Failure Analysis, Fire & Explosion Investigation, Metallurgy and Materials Science, and Firearms & Ballistics, Corrosion.
Expert ListingsRobert Jonardi
Founder/Principal, Phoenix QuattuorE Strategy & Consulting
Colorado Springs, CO
I have B.S. and M.S. degrees in Chemical Engineering and 40+ years of experience spanning engineering, energy R&D, technical engineering and environmental consulting, data analysis, project management, and senior management consulting experience -- serving Fortune 500 companies and executives, and Law Firms. I am the Founder of Phoenix QuattuorE Strategy & Consulting, providing Environment, Energy, and Engineering expertise and services. I can aptly serve as a consulting or testifying expert for trial, arbitration, or government hearings - or as a litigation consultant. My background includes 14 years in financial auditing, litigation support and advisory services, within two of the Big Four firms. I am passionate about superior customer service. My Wharton MBA has served me well in creating, delivering and communicating high value results and helping my clients succeed. I have a strong engineering acumen for preparing formal calculations and in evaluating technology and hazard risk - including assessing technology strategy, preventive maintenance, environmental compliance, performance measurement, and am adept at problem-solving support and solution management.
Ernest P. Chiodo, MD, JD, MPH, MS, MBA, CIH
Clinical and Forensic Medicine
MD & JD (Wayne State), MPH (Harvard), MS (Biomedical Engineering and Toxicology-WSU), MBA (University of Chicago), MS (University of Oxford), CIH. Physician, Attorney, Certified Industrial Hygienist, Toxicologist & Epidemiologist. Former Medical Director of the Detroit Health Department. Board certified in internal med, occupational & environ. med, & public health. Inducted into the Engineering Hall of Fame (Wayne State University).
Roger W. Griffith, P.E.
Griffith Engineering & Consulting, Inc.
Jefferson City, TN
Roger Griffith, P.E. provides engineering design, forensic analysis, and expert witness consulting in plumbing, fuel gas systems, HVAC, and fire protection. Specialty areas include hot water systems, scalding, legionella, carbon monoxide poisoning related to venting of gas appliances, and fuel gas fires and explosions. He has provided expert witness services, including deposition and trial testimony for over fourteen years.
Managed Response Inc.
Sugar Land, TX
John Williams, Ph.D., M.B.A., PE - EPS
South Bend, IN
Dr. Williams leads EPS a full-service engineering firm delivering engineering procurement and construction services for refining chemicals power generation equipment fabrication and material-making facilities.
CONSULTING ELECTRICAL ENGINEER
Ralph B Marshall, P.E.
Forty five years of experience in all phases of electrical design work ranging from small commercial projects to multimillion dollar contracts for government and private industry. Comprehensive background in all project phases including preliminary studies, preparation of scope and design criteria, electrical equipment applications, preparation of specifications and working drawings, field installations of electrical systems, expert witness services, analysis and forensic engineering.
Steven B. Kushnick, PE, Inc.
Mechanical Engineering Expert
Turbomachinery Expert. Jet Engines, Gas Turbine Engines, Steam Turbines, Compressors, Pumps, Diesels, Cogeneration, Combustion, Failure Analysis, and Engineering Analysis.
Michael Ellison, PhD
Materials Science Professor Emeritus, Clemson University
Dr. Ellisons personal education and research and his teaching experience included the mechanisms of polymer failure for a broad range of materials and end products. Accordingly, he can interpret the data from the laboratory tests required to determine probable causes of product failure. This experience enables him to conduct forensic analyses and present clear, understandable and data-supported opinions on predominant modes of failure of polymeric materials, under various conditions.
Head Of Engineering, LLC
Michael C. Head, PE, LEED AP BD+C
Mr. Head has more than 35 years of structural engineering analysis design and project/construction management experience throughout Saudi Arabia and the United States. His investigation design and construction experience make him highly qualified to engage in forensic investigations and to assist the design construction and legal communities.
Franklin Fong, G.E.
Consulting Geotechnical Engineer
Diamond Bar, CA
Consultant/Expert Witness with over 40 years experience, providing services to attorneys, arbitrators, insurance companies, and others in the investigation and remediation of soil/foundation distress, slope instability, expansive soils, fill compaction, groundwater seepage, and other matters related to adverse soil/geologic conditions and deficient construction.
CASE Consultants & Forensics
Kamran Nemati, Ph.D., P.E., F.ASCE, F.ACI
Technical assessments involving structural and construction related issues including residential, commercial, transportation, and industrial projects. Determining the cause, origin, and extent of structural failures, construction defects, materials defect, and water intrusion related distress. Investigation of settlement and foundation failure, construction liability, materials of construction and evaluation of structural damage and defect. Developing repair strategies.
The Augustus Group
Over 40 years experience in materials technology, mechanical integrity, and risk analysis. managed and conducted hundreds of failure analysis/incident investigations, fitness for service projects and risk/safety assessments. Experienced in hazard identification and probability/consequence analysis, particularly as it relates to crisis and asset integrity management for the petroleum and chemical industries (both upstream and downstream) and the power industry.
Givler Engineering Inc.
L. David Givler
San Antonio, TX
L. David Givler MSCE PE is the president of the firm. He is a technical expert in hydrology and hydraulics with experience since 1984. His experience in municipal engineering and site development began in 1987.
The Expert of Experts
Over 10,000 CLIENTS HAVE RETAINED OUR EXPERTS NATIONWIDE! Cross examine thousands of experts with one phone call. We are your Expert Witness Services firm since 1991! We make it easy & provide you with the RIGHT EXPERT promptly. Searches,referrals & initial discussions are at NO COST to you. Our TECHNICAL ADVANTAGE gives you COMPETITIVE EDGE.
Pacific Structural & Forensic Engineers Group Inc. (PSFEG)
Casey K. Hemmatyar, SE
Los Angeles, CA
With about 30 years of experience Casey Hemmatyar, SE has been retained as Forensic Structural Engineer & expert consultant witness by defendants & plaintiffs on construction litigation in single and Class-Action lawsuits. Offices in 5 Continents, 8 Countries and 22 Cities. LA, San Francisco, San Jose, Sacramento, Irvine, San Diego, Santa Barbara, Ventura, Seattle, Las Vegas, Reno, Denver, Houston, Washington DC, Washington, New York, Canada, UK, New Zealand, Japan, South Africa, Chile, Qatar.
Stone Consulting Inc.
More than 20 Yrs. of experience in railroad design, railroad structures, railroad track, railroad equipment, grade crossings, shortline railroads and tourist railroads. Licensed as PE in 31 states. Can also provide structural expertise in the railroad area. Accepted by STB as expert witness in railroad design, engineering and construction.
Miller Engineering Services
Gregory Miller, PE
Cedar Park, TX
Engineering Consulting Services for Litigation. Expert in Electrical Loss Investigations, Power Distribution, Construction, Industrial & Product/Machine Design. Texas/Nationwide Injury Loss Investigators.
J.W. Kalis Engineering, LLC
John Kalis, P.E.
Expertise in Asbestos, Construction accidents, Commercial Equipment, Engineering Forensic Disciplines, Failure analysis, Fire Protection Engineering, Industrial Design, International Testified, Machinery and Industrial Equipment. Machinery Equipment, Power Plant Fossil, Power Plant Nuclear, Refineries Safety, Accidents and Injuries, Investigative & Forensics.
Shatec Engineering Consultants, LLC
Shakir Shatnawi, Ph.D., P.E., President
El Dorado Hills, CA
Highway and traffic engineering - accidents, design, safety, signals, control devices, surface defects, sight obstructions, sight distance, inspection, hazards, pavement, asphalt, concrete, specifications, standards, quality, maintenance, code violations, liability, and causation. Public works, Caltrans experience, civil/traffic engineering design plans, field investigations, site inspections, recovery areas, guardrail, edge-drop, potholes, grade, drainage, settlement.
Alpine Engineering & Design, Inc.
Fred P. Smith, David G. Smith, Nathan H. Morrill, Cameron C. Orr
Our experts have designed, inspected and worked engineering forensics for many years. Some cases require our experts to run simulations using 3D modeling. Our experts are all highly trained engineers who have years of experience doing 3D drawings in Solid Works. They can reproduce almost any accident scene using animations. The actual accident scene and the actual equipment will almost always need to be seen to rule out any other factors playing a part. This is fairly typical in any accident investigation. Once all of the details have been gathered our experts can put their findings together and provide information with a reasonable degree of engineering certainty. Because of the high-quality analysis and reports, our experts provide you can rely on the work we do. Request one of our experts https://alpineeng.com/our-experts/ or call 801-763-8484
Habitat Engineering & Forensics, Inc.
Fari Barzegar, PhD, PE
Over 30 years of experience; Structural/Civil Engineering; Construction Defects/Accidents & Disputes; Buildings, Bridges, Silos, Public Works; Vibration, Explosion, Earthquake, Wind, Fire, Flood & Demolition-Related Damage; Failure Investigations/Analysis, Errors/Omissions, Code Compliance, Standard of Care; Slip, Trip & Fall Injuries; Inspection & Report; Expert Consultant/Witness in Over 60 Cases; Testimony & Trial Experience