Safety Priority

Safety Priority

Chip Darius, OHST, CET, CSHO, CUSP

110 Court St Suite 1 Cromwell, CT 06416

About the Expert

27 years experience in safety and OSHA compliance consulting & training. 16 years as instructor for OSHA Training Institute Education Center. Over 750 safety clients in more than 30 states and internationally since 2000. Expertise in falls, scaffolds, ladders, aerial lifts, forklifts, slips, machine guarding, heavy equipment, work zones.

Areas of Expertise

  • Accident Reconstruction
  • Fall Protection
  • Ladders & Scaffolds
  • Materials Handling
  • Safety OSHA
  • Slips and Falls

Expert's Profile

Chip Darius credentials include:
* Certified OHST (Occupational Hygiene & Safety Technologist)
* Certified CET (Certified Environmental Safety & Health Trainer)
* Certified CSHO (Certified Safety & Health Official)
* Certified CUSP (Certified Utility Safety Professional)
* Certified FSS (Forklift Safety Specialist)
* Certified EMT (Emergency Medical Technician), 38 years
* Certified Walkway Auditor Certificate Holder
* Certified Forklift Operator Trainer - counterbalanced and rough terrain
* Certified Aerial Lift Operator Trainer
* Certified Scissor Lift Operator Trainer
* Certified Skid Steer Loader Operator Trainer
* Certified Backhoe Loader Operator Trainer
* Certified Front-end Loader Operator Trainer
* Certified Flagger Instructor
* Certified Work Zone Safety Supervisor
* Certified Scaffold Competent Person Trainer
* Certified First Aid, CPR & AED Instructor
* Certified First Aid, CPR & AED Instructor Trainer

Please request complete CV for credentials.

Member: American Society of Safety Engineers, National Safety Council, Associated General Contractors of America, National Fire Protection Association, National Association of Safety Professionals, National Environmental Safety & Health Training Association, National Floor Safety Institute, Scaffold & Access Industry Association, American Traffic Safety Services Association, Utility Safety & Ops Leadership Network.

* 27 years experience in safety and OSHA compliance for general industry and construction. Regional Faculty teaching for OSHA Training Institute Region 1 Education Center since 2002. Authorized OSHA Outreach Trainer teaching both general industry and construction. Areas of special interest include forklifts, amputations, machine injuries, slips, falls, fall protection, ladders & scaffolds, aerial lifts, scissor lifts, multi-employer worksites, training.

Personal Achievements


  • BS, University of Connecticut, 1985
  • MA, University of Connecticut, 1988


  • Certified Occupational Hygiene & Safety Technologist, BCSP.
  • Certified Environmental Safety & Health Trainer, BCSP.
  • Certified Safety & Health Official, OTIEC.
  • Certified Utility Safety Professional, USOLN.
  • Certified Forklift Safety Specialist, NASP.
  • Certified Walkway Auditor Certificate Holder, NFSI.
  • Certified Emergency Medical Technician, State of CT.

Special Training

  • Instructor for OSHA Training Institute Region 1 Ed. Center since 2002
  • Principles of Occupational Safety & Health, NSC
  • OSHA 10-hour & 30-hour Construction Outreach courses
  • OSHA 10-hour & 30-hour General Industry Outreach courses
  • OSHA 501: Outreach Trainer for General Industry
  • OSHA 510: Occupational Safety and Health Standards for the Construction Industry
  • OSHA 511: Occupational Safety and Health Standards for General Industry
  • OSHA 7505: Incident/Accident Investigation
  • OSHA 7300: Confined Space
  • OSHA 461: Work Zone Safety.
  • OSHA 521: Industrial Hygiene.
  • OSHA 2045: Machine Safeguarding.
  • OSHA 2250: Ergonomics.
  • OSHA 2264: Permit-required Confined Spaces.
  • OSHA 3010: Excavation Safety.
  • OSHA 3095: Electrical Safety.
  • OSHA 3110: Fall Protection.
  • OSHA 7120: Combustible Dust Hazards.
  • OSHA 7845: Recordkeeping.
  • Safety Management Systems Train the Trainer, NSC.
  • First Aid, CPR & AED Instructor Trainer, NSC.
  • NFPA 70E and Arc Flash Analysis.
  • NFPA 101 Life Safety Code.
  • Powered Industrial Truck trainer.
  • Aerial Lift Operator trainer.
  • Skid Steer Operator trainer.
  • Backhoe Loader Operator trainer.
  • Skid Steer Operator trainer.
  • Front-end Loader Operator trainer.
  • Respiratory Protection Program Administrator.
  • Scaffold Competent Person.
  • Trenching & Excavation Competent Person.
  • Roadway Work Zone Safety Supervisor.
  • Flagger Trainer, NSC Instructor #976255.
  • Flagger Instructor, ATSSA.


  • American Society of Safety Engineers
  • National Safety Council
  • Associated General Contractors of America
  • National Floor Safety Institute
  • National Fire Protection Association
  • Council on Certification of Health, Environmental & Safety Technologists
  • Scaffold & Access Industry Association
  • American Bar Association
  • American Traffic Safety Services Association


  • Voted One of the Best 8 times, CT Law Tribune annual poll.
  • Speaker at national expert witness training conferences.

Prior assignments

  • Over 160 cases as of March, 2018.

Percentage of time spent as expert

  • 50%

More Information

Listed in the Following States

Safety Priority is listed with ExpertPages in the following jurisdictions: All US Regions and States.